Firmware Update; Use Pc Tools (Sysmac Studio) To Update - Omron ZW-XC7 User Manual

9-2

Firmware Update

For information on how to obtain the latest version of the firmware, please contact your OMRON sales
representative.
After obtaining the latest version of the firmware, follow the procedure below to update the firmware.
Important
Do not turn OFF the power supply to the Sensor Controller during updating. The Sensor Controller would no longer
start up properly.

Use PC tools (Sysmac Studio) to update.

 Explorer pane
→ Edit pane
1
Click [Sensor setup] - [Update], and select
the update file.
The update file extension is ".BIN". When the file
is selected, the [FirmwareWriteInWindow]
popup is displayed.
Important
The current firmware version is displayed at
[Sensor setup]. Be sure to check the version
before updating the firmware.
2
Click [Start the update.].
A message to confirm to start the update
appears.
Important
When you click [Start the update.], if the "Different
format" message is displayed, this means that the
format information for the connected Sensor
Controller and the specified file do not match. If
this happen, never continue with the firmware
update. The Sensor Controller breaks down and
no longer starts up properly.
252
Firmware Update
: [Device Group] | [(Sensor Name)] (double click)
: [Tools] icon ( )
ZW-7000 User's Manual