8-5 Functions and Operations during Measurement
Switching the RUN (Run) Mode Display
In the RUN mode, you can switch the measured value display by pressing the
You can check the threshold value and analog output value while displaying the measured value on the main display.
HIGH threshold value
H lit
L unlit
Amount of light
received
H unlit
L unlit
Internal logging status
H unlit
L unlit
Tag link status
H unlit
L unlit
The above display screenshots are only samples and may different from actual displays.
(Note 1) An output item not selected on the analog output (Voltage output/Current output) is displayed as "------
" on the sub-display. For example, if "Voltage output" is selected on the analog output, the analog
current output value is displayed as "------" on the sub-display.
(Note 2) "Displayed task" can be selected from TASK1 to TASK4. "Task for displayed target" is displayed as "dTASK@."
@ indicates the task number. (Refer to p.192 for the task for displayed target.) ) If the task for displayed
target is TASK2, for example, "TASK1," "dTASK2," "TASK3" and "TASK4" will be displayed.
ZW-7000 User's Manual
LOW threshold value
H unlit
L lit
Displayed Task for
displayed target
L unlit
H unlit
Online status
H unlit
L unlit
Link status
H unlit
L unlit
/
Analog voltage
output value
H unlit
L unlit
(Note 2)
Task for
displayed target
L unlit
H unlit
Distance
H unlit
L unlit
Distance
H unlit
L unlit
Functions and Operations during Measurement
keys during the operation.
(Note 1)
Analog current
output value
L unlit
H unlit
Judgement result
L unlit H unlit
Resolution
L unlit H unlit
Amount of emitted
light
L unlit H unlit
189