Omron ZW-XC7 User Manual page 59

Important
• Handling fiber cables
Use them in compliance with the following.
-Fiber cable bend radiuses must be at least 20 mm.
-Do not let bending cause stress at the root section of a fiber connector.
-Do not yank hard on a fiber cable.
-Do not step on a fiber cable or place anything heavy on it.
-Do not apply torsion stress to the fiber cable.
• Do not touch the end surface of a fiber cable, or the cable may be degraded in performance. Should the end surface
be touched or soiled, wipe the dirt away using a commercially available cleaner exclusive for fiber or dry and soft
cloth. Do not use a cloth moistened with alcohol, or the dirt may be reattached.
• Use optional ZW-XCL or commercially available fiber cleaner when cleaning the groove of the fiber connector. For
how to clean the fiber connector using ZW-XCL, refer to the
ZW-XCL (p.58)
.
• If you frequently insert and extract the Sensor Head, recommend to use the commercially available fiber cleaner
which can use repeatedly.
Product name Model
NEOCLEAN-M ATC-NE-M1
• Contact
Japan
NTT Advanced Technology Corporation
TEL: 0422-47-7888
China
GUANGZHOU LI CHENG OPTOELECTRONIC CO.,LTD.
TEL: 020-8165 0508
Hong Kong
ComStar Communications Ltd.
TEL: +852 2536 9737
Taiwan
Global Science Instruments Co., Ltd.
TEL: +886-2-8913-2737 Ext. 33
India
Aishwarya Telecom Ltd.
TEL: +91 40 2753 1324
Singapore
Masstron Pte Ltd
TEL: (65) 6763 0309
Malaysia
Masstron Communication Solutions Sdn Bhd
TEL: (603) 8061 0309
Thailand
Masstron (Thailand) Co.,Ltd
TEL: (66-2) 319-9375/6
ZW-7000 User's Manual
Cleaning the fiber connector and fiber cable using
Manufacture
NTT Advanced Technology Corporation
57
Installation