Setting Hold - Omron ZW-XC7 User Manual

Setting Hold

Setting the Hold Mode
Setting the Hold Mode p.121
As an example, here is an explanation of the procedure for selecting the "PEAK" hold mode setting.
Operating procedure
Steps Key operation
1
2
3
4
5
6
7
8
ZW-7000 User's Manual
Display Description
Press and hold the
mode.
Press the
Press the
Press the
key.
Press the
key.
Press the
key.
Set the hold mode.
PEAK: Peak
BOTTOM: Bottom
P-P: PEAK TO PEAK
AUTOPK: AUTO PEAK
AUTOBT: AUTO BOTTOM
AUTOPP: AUTO PEAK TO PEAK
AVE: AVERAGE
SAMPLE: Sampling
OFF: Through
The current setting value is displayed on the sub-display.
Press
In this example, select "PEAK" and press the
Press the
key for two seconds to enter the FUNC
/ key to select MEAS, then press the
/ key to select TASK1, then press the
/ keys to select "OUTPUT" and press the
/ keys to select "HOLD" and press the
/ keys to select "TYPE" and press the
/ key to enter editing mode and the sub-display blinks.
key for two seconds to enter the RUN mode.
Setting the Output Conditions
key.
key.
key.
211