Omron ZW-XC7 User Manual page 194

Changing Display Details
The measurement result displayed on the main display in RUN mode can be selected from TASK1 to 4.
The number of digits displayed can also be changed.
Setting [DISPLAY]
Task for displayed target [DISP]
Decimal point digit [DEC.NUM]
As an example, here is an explanation of the procedure for setting TASK2 as the task to be displayed target.
Operating procedure
Steps Key operation
1
2
3
4
192
Functions and Operations during Measurement
Option [DISPLAY]
TASK1/TASK2/TASK3/TASK4
0 [0DIG]/1 [1DIG]/2 [2DIG]/3 [3DIG]/4 [4DIG]/5 [5DIG]
Display Description
Press the
menu.
Press the
Select the task to be the displayed target.
The current setting value is displayed on the sub-display.
Press
Select "TASK2" and press the
Press the
key in the RUN mode to display the setting
/ keys to select "DISP" and press the
/ key to enter editing mode and the sub-display blinks.
key.
key to leave the setting menu.
key.
ZW-7000 User's Manual