Perform The Zero Reset; Zero Reset - Omron ZW-XC7 User Manual

3-5 Perform the Zero Reset

Zero reset

What is Zero Reset?
This function allows resetting the measured value to "0" at any timing during measurement in the RUN mode.
The measured value can be displayed and output as a positive or negative deviation (tolerance) from the set
reference value "0".
Example 1: Use the height of the sensing object as a reference value and the deviation is the measured value.
0
(reference value)
Sensing
object
Example 2: Use the measured value according to the height of the sensing object (set 10 as an offset value)
Sensor head
+10.5 (HIGH threshold value)
10
Sensing
+9.5 (LOW threshold value)
object
ZW-7000 User's Manual
Sensor head
+0.5 (HIGH threshold value)
-0.5 (LOW threshold value)

Perform the Zero Reset

89