Omron ZW-XC7 User Manual page 182

Measurement
setting
[TASK1]
[MEAS]
(cont'd) (cont'd)
[TASK2]
[TASK3]
[TASK4]
Non-measurement
I/O setting
[I/O]
[HLD.RST]
Judgment
[JUDGE]
Digital output
[DIGTAL]
*1. For more detail, refer to the following.
7-1 Connecting Parallel I/O in Confocal Fiber Type Displacement Sensor User's Manual for Communications Settings (Cat.
No.Z363-E1-01).
180
Search from Menu Tree
TASK1 Threshold
[JUDGE]
(Same content as TASK1)
TASK2
Default value of measurement item is [NONE]
(Same content as TASK1)
TASK3
Default value of measurement item is [NONE]
(Same content as TASK1)
TASK4
Default value of measurement item is [NONE]
setting
Output target
[OUTPUT]
Hysteresis
[HYS]
Timer
[TIMER]
Setting
High
-999.999999 to 999.999999 mm
Teaching
threshold
(default value: +25% of measuring
[TEACH]
[H.JUDGE] range)
-999.999999 to 999.999999 mm
Low threshold
(default value: -25% of measuring
[L.JUDGE]
range)
High
-999.999999 to 999.999999 mm
Direct
threshold (default value: +25% of measuring
[DIRECT]
range)
[H.JUDGE]
-999.999999 to 999.999999 mm
Low threshold
(default value: -25% of measuring
[L.JUDGE]
range)
Non-measurement
setting
Keep [KEEP]/Clamp [CLAMP]*
[HLD.RST]
Output target
TASK1 [TASK1]*/TASK2 [TASK2]/
[OUTPUT] TASK3 [TASK3]/TASK4 [TASK4]
0 to 99.9999 mm
Hysteresis
(default value: 0.05% of measuring
[HYS]
range)
TIMER
Off* [OFF]/Off delay [OFF.DLY]/
[TIMER] On delay [ONDLY]/One shot [1SHOT]
Timer time
0.2 to 5000 ms (default value: 0.2)
[TIME]
OFF[OFF] / TASK1 [TASK1]* / TASK2
[TASK2] / TASK3 [TASK3] / TASK4
[TASK4] / Amount of emitted light [LIGHT]
/ Peak amount of received light (Exposure
control edge) [PEAK.CT] / Peak amount
Output data 1
of received light (1st surface) [PEAK.1] /
[OUT1]
Peak amount of received light (2nd
surface) [PEAK.2] / Peak amount of
received light (3rd surface) [PEAK.3] /
Peak amount of received light (4th
surface) [PEAK.4]
OFF[OFF] / TASK1 [TASK1] / TASK2
[TASK2]* / TASK3 [TASK3] / TASK4
[TASK4] / Amount of emitted light [LIGHT]
/ Peak amount of received light (Exposure
control edge) [PEAK.CT] / Peak amount
Output data 2
of received light (1st surface) [PEAK.1] /
[OUT2]
Peak amount of received light (2nd
surface) [PEAK.2] / Peak amount of
received light (3rd surface) [PEAK.3] /
Peak amount of received light (4th
surface) [PEAK.4]
OFF[OFF] / TASK1 [TASK1] / TASK2
[TASK2] / TASK3 [TASK3]* / TASK4
[TASK4] /Amount of emitted light [LIGHT]
/ Peak amount of received light (Exposure
control edge) [PEAK.CT] / Peak amount
Output data 3
of received light (1st surface) [PEAK.1] /
[OUT3]
Peak amount of received light (2nd
surface) [PEAK.2] / Peak amount of
received light (3rd surface) [PEAK.3] /
Peak amount of received light (4th
surface) [PEAK.4]
OFF[OFF] / TASK1 [TASK1] / TASK2
[TASK2] / TASK3 [TASK3] / TASK4
[TASK4]* / Amount of emitted light
[LIGHT] / Peak amount of received light
(Exposure control edge) [PEAK.CT] /
Output data 4
Peak amount of received light (1st
[OUT4]
surface) [PEAK.1] / Peak amount of
received light (2nd surface) [PEAK.2] /
Peak amount of received light (3rd
surface) [PEAK.3] / Peak amount of
received light (4th surface) [PEAK.4]
Option/Setting Range Pages
p.225
p.227
ZW-7000 User's Manual
*1
*1
*1
*1
*1
*1
*1
*1