Omron ZW-XC7 User Manual page 113

 Explorer pane
→ Edit pane
→ Task Settings window : [Scaling]
1
Set the [Scaling] to OFF.
2
Click [Auto setting].
The [Scaling] popup menu appears.
3
Select [Actual scaling (one point)], and click
[Next >].
The [Scaling] popup menu display changes to
[1st point settings], and the current measured
value is displayed at [Current value].
4
Click [STOP] to fix the [Current value], set
[Set value] and click [Next >].
The [Scaling] popup menu display changes to
[Direction settings].
Note
The [Current value] display is refreshed at a 100
ms cycle. When [STOP] is clicked, refreshing of
the [Current value] display stops. Clicking the
[STOP] button again resumes display refreshing.
5
Set the change direction, and click [Next >].
The [Scaling] popup menu display changes to
[Confirm the scaling parameters], and the span
and offset values are displayed.
6
Click [OK].
Note
1-point scaling can also be executed by the operating keys on the Sensor Controller.
Performing 1-point Scaling p.208
ZW-7000 User's Manual
: [Bank] | [(Bank Data Name)] (double click)
: [Task Settings] icon ( )
Setting the Output Conditions
111