Setting Sensing; Setting The Measurement Cycle; Setting The Material Of The Target To Measure - Omron ZW-XC7 User Manual

4-1 Setting Sensing

Setting the Measurement Cycle

Set the measurement cycle.
Item Setting item
RUN mode Measurement
Cycle
 Explorer pane
→ Edit pane
→ Sensing settings window : [Operating mode]
1
Set [Measurement cycle].
You can set the Measurement cycle by using key operation of the Sensor Controller. p.***.

Setting the Material of the Target to Measure

Select the appropriate linearity coefficient setting depending on the target to the measurement.
Item Setting item
Operation mode Material
 Explorer pane
→ Edit pane
→ Sensing settings window : [Operating mode]
1
Select the material of the target to measure
at [Material].
Important
This setting does not affect linearity.
98

Setting Sensing

Setting value
20 to 400 [us]
(default: 200us)
: [Bank] | [(Bank data name)] (double-click)
: [Sensing setting] icon (
Setting value
Normal (default value)
Mirror
Rough
: [Bank] | [(Bank data name)] (double-click)
: [Sensing setting] icon (
Description
Set the measurement cycle.
)
Description
A measurement can be performed at specific linearity
regardless of the type of target to measure.
Usually, select this setting.
This setting allows for high linearity measurement if the
surface of the object gives a mirror-like reflection, such as
with glass, wafer, or metallic luster objects.
Selecting the mode when the surface is diffusing, possible
to acquire the high linearity measurement of resin, ceramic,
or etc.
)
ZW-7000 User's Manual