Figure 68: Returning To The Privileged Exec Mode; Figure 69: Saving The Priority Values With The Write Command - Allied Telesis AT-IE510-28GSX Installation Manual

Chapter 10: Powering On the Stack
112
awplus(config)# exit
awplus#
Figure 68. Returning to the Privileged Exec Mode
4. Enter the WRITE command to save your change in the configuration
file. The switch displays the confirmation prompt in Figure 69.
awplus# write
Building configuration ...
[OK]
awplus#
Figure 69. Saving the Priority Values with the WRITE Command
5. To end the management session, enter the EXIT command.