Figure 27: Loosening The Two Captive Screws On The Dc Connector; Figure 28: Removing The Dc Connector - Allied Telesis AT-IE510-28GSX Installation Manual

AT-IE510-28GSX Installation Guide
Figure 27. Loosening the Two Captive Screws on the DC Connector
2. Slide the DC connector from the chassis. Refer to Figure 28.
Figure 28. Removing the DC Connector
3. Use a 3mm (0.125 in.) flat-head screwdriver to loosen the two captive
screws on the top of the DC connector. Refer to Figure 29.
67