Table of Contents
Advertisement
Chapter 1: Overview
Switch ID LED
28
LED
State
Link/Activity
Off
Solid green
Flashing
green
The Switch ID LED, shown in Figure 6, displays the ID number of the
switch. A stand-alone switch has the ID number 0. Switches in a VCStack
have the numbers 1 to 4. Chapter 10, "Powering On the Stack" on page
105 has the procedure for verifying and, if necessary, changing the ID
number of the switch.
The states of the LED when the switch is not operating in the low power
mode are shown in Figure 7.
Table 3. Stacking Slot LEDs
The slot is empty, the transceiver has not
established a link to a network device, or
the LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.
The transceiver has established a link at
10 Gbps to another switch in the stack.
The transceiver is receiving or
transmitting packets.
Figure 6. Switch ID LED
Description
Switch ID LED
Advertisement
Table of Contents
