Table of Contents
Advertisement
Chapter 3: Beginning the Installation
Unpacking the Switch
52
Figure 14 lists items that come with the switch. If any item is missing or
damaged, contact your Allied Telesis sales representative for assistance.
One 2 m (6.6 ft) local management cable with
RJ-45 (8P8C) and DB-9 (D-sub 9-pin)
connectors
Two wall mounting brackets
Figure 14. Components of the Switch
Also included are four rubber feet and plastic push rivets; eight M3 bracket
screws; and four #8 x 1.5-inch wood screws with plastic anchors.
Note
You should retain the original packaging material in the event you
need to return the unit to Allied Telesis.
After checking the contents of the shipping containers, go to Chapter 4,
"Mounting the Switch" on page 53.
Two rack mounting brackets
(pre-installed on the switch)
Advertisement
Table of Contents
