Figure 62: Installing An Sfp+ Module; Figure 63: Removing The Dust Cover From An Sfp+ Module - Allied Telesis AT-IE510-28GSX Installation Manual

Chapter 9: Cabling the Stacking Ports
102
Figure 62. Installing an SFP+ Module
4. Remove the dust cover from the SFP+ module, as shown in Figure 63.
Figure 63. Removing the Dust Cover from an SFP+ Module
5. Verify the position of the handle on the SFP+ module. If the module is
in the S1 slot, the handle should be in the upright position, as shown in
Figure 64. If the transceiver is in the S2 slot, the handle should be in
the down position.