Figure 64: Positioning The Handle In The Upright Position; Figure 65: Connecting The Fiber Optic Cable To An Sfp+ Module - Allied Telesis AT-IE510-28GSX Installation Manual

Figure 64. Positioning the Handle in the Upright Position
6. Connect the fiber optic cable to the SFP+ module, as shown in
Figure 65. The connector on the cable should fit snugly into the port,
and the tab should lock the connector into place.
Figure 65. Connecting the Fiber Optic Cable to an SFP+ Module
7. Repeat this procedure if the switch is to have two stacking modules.
AT-IE510-28GSX Installation Guide
SFP Handle
103