Figure 71: Removing The Dust Cover From An Sfp+ Transceiver; Figure 72: Positioning The Sfp+ Handle In The Upright Position - Allied Telesis x330 Series Installation Manual

Figure 71. Removing the Dust Cover from an SFP+ Transceiver
6. Verify that the transceiver handle is in the upright position. Refer to
Figure 72.
SFP+ Handle
Figure 72. Positioning the SFP+ Handle in the Upright Position
7. Connect the fiber optic cable to the transceiver. Refer to Figure 73 on
page 110. The cable connector should fit snugly into the port, and the
tab should lock the connector into place.
x330 Series Installation Guide for Standalone Switches
109