Figure 78: Removing The Dust Cover From An Sfp+ Transceiver; Figure 79: Positioning The Sfp+ Handle In The Upright Position - Allied Telesis CentreCOM GS970EMX/52 Installation Manual

Figure 78. Removing the Dust Cover from an SFP+ Transceiver
6. Verify that the transceiver handle is in the upright position. Refer to
Figure 79.
SFP+ Handle
Figure 79. Positioning the SFP+ Handle in the Upright Position
7. Connect the fiber optic cable to the transceiver. Refer to Figure 80 on
page 154. The cable connector should fit snugly into the port, and the
tab should lock the connector into place.
CentreCOM GS970EMX Series Installation Guide for Standalone Switches
153