Electrical Connection; Checking The Mains Voltage; Connecting The Cables To The Controller - Dürkopp Adler 512 Assembly Instructions Manual

84
8.3.8

Electrical connection

DANGER
Risk of injury from electricity!
Unprotected contact with electricity can result in
serious injuries or death.
Work on the electrical system must ONLY be
performed by qualified electricians or
appropriately trained and authorized personnel.
ALWAYS unplug the power plug before working
on the electrical equipment.
8.3.9

Checking the mains voltage

The voltage specified on the controller type plate must agree with
the mains voltage used.

8.3.10 Connecting the cables to the controller

Fig. 30: Connecting the cables to the controller
1. Connect the cables.
All cables are labelled appropriately.
2. Lay the cables to the control cabinet and bundle together with
cable ties.
Operating Instructions 512/532 - 04.0 - 08/2016
Setup