Vsi; Vxlan - H3C CR16000-F Command Reference Manual

Examples
# Enable packet statistics for automatically created VXLAN tunnels.
<Sysname> system-view
[Sysname] tunnel statistics vxlan auto
Related commands
display interface tunnel (Layer 3—IP Services Command Reference)
reset counters interface tunnel (Layer 3—IP Services Command Reference)
statistics enable (tunnel interface view)

vsi

Use vsi to create a VSI and enter its view, or enter the view of an existing VSI.
Use undo vsi to delete a VSI.
Syntax
vsi vsi-name
undo vsi vsi-name
Default
No VSIs exist.
Views
System view
Predefined user roles
network-admin
Parameters
vsi-name : Specifies a VSI name, a case-sensitive string of 1 to 31 characters.
Usage guidelines
A VSI acts as a virtual switch to provide Layer 2 switching services for a VXLAN on a VTEP. A VSI
has all functions of a physical Ethernet switch, including source MAC address learning, MAC
address aging, and flooding.
A VSI can provide services only for one VXLAN.
Examples
# Create VSI vxlan10 and enter VSI view.
<Sysname> system-view
[Sysname] vsi vxlan10
[Sysname-vsi-vxlan10]
Related commands
display l2vpn vsi

vxlan

Use vxlan to create a VXLAN and enter its view, or enter the view of an existing VXLAN.
Use undo vxlan to restore the default.
29