Field
Output: 0 packets, 0 bytes, 0 drops
# Display brief information about all VSI interfaces.
<Sysname> display interface vsi-interface brief
Brief information on interfaces in route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
Vsi100
# Display brief information and complete description for VSI-interface 100.
<Sysname> display interface vsi-interface 100 brief description
Brief information on interfaces in route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
Vsi100
# Displays interfaces that are physically down and the down reason.
<Sysname> display interface brief down
Brief information on interfaces in route mode:
Link: ADM - administratively down; Stby - standby
Interface
Vsi100
Vsi200
Table 12 Command output
Field
Interface
Link
Protocol
Primary IP
Description
Description
•
Number of dropped incoming packets.
Outgoing traffic statistics on the interface:
•
Number of outgoing packets.
•
Number of outgoing bytes.
•
Number of dropped outgoing packets.
Link Protocol Primary IP
DOWN DOWN
--
Link Protocol Primary IP
UP
UP
1.1.1.1
Link
Cause
DOWN
Administratively
DOWN
Administratively
Description
Abbreviated interface name.
Physical link state of the interface:
•
UP—The interface is physically up.
•
DOWN—The interface is physically down.
•
ADM—The interface has been shut down by using the
command. To restore the physical state of the interface, use the
undo shutdown
•
Stby—The interface is a backup interface in standby state.
Data link layer protocol state of the interface:
•
UP—The data link layer protocol of the interface is up.
•
UP (s)—The data link layer protocol of the interface is up, but the link
is an on-demand link or does not exist. The (s) attribute represents
the spoofing flag.
•
DOWN—The data link layer protocol of the interface is down.
Primary IP address of the interface. This field displays two hyphens (--) if
the interface does not have an IP address.
Description of the interface.
40
Description
Description
VSI-interface100
command.
shutdown