Display L2Vpn Vsi - H3C CR16000-F Command Reference Manual

Field
DF State
Statistics
Input Statistics
Output Statistics
Related commands
service-instance

display l2vpn vsi

Use display l2vpn vsi to display information about VSIs.
Syntax
display l2vpn vsi [ name vsi-name ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name vsi-name : Specifies a VSI by its name, a case-sensitive string of 1 to 31 characters. If you
do not specify a VSI, this command displays information about all VSIs.
verbose : Displays detailed information about VSIs. If you do not specify this keyword, the
command displays brief information about VSIs.
Examples
# Display brief information about all VSIs.
<Sysname> display l2vpn vsi
Total number of VSIs: 1, 1 up, 0 down, 0 admin down
Description
•
Down.
Whether the device is the designated forwarder for the AC at a multihomed EVPN
site:
•
BDF—The device is a backup designated forwarder.
•
DF—The device is the designated forwarder.
This field is not displayed if no Ethernet segment identifiers are configured on the
interface.
Packet statistics state:
•
Enabled—The packet statistics feature is enabled for the Ethernet service
instance.
•
Disabled—The packet statistics feature is disabled for the Ethernet service
instance.
Incoming traffic statistics:
•
Octets—Number of incoming bytes.
•
Packets—Number of incoming packets.
•
Errors—Number of error packets.
•
Discards—Number of dropped packets.
Outgoing traffic statistics:
•
Octets—Number of outgoing bytes.
•
Packets—Number of outgoing packets.
•
Errors—Number of error packets.
•
Discards—Number of dropped packets.
11