Shutdown; Vtep Group Member Local - H3C CR16000-F Command Reference Manual

Predefined user roles
network-admin
Parameters
vsi-interface [ vsi-interface-id ] : Specifies VSI interfaces. If you specify a VSI
interface, this command clears packet statistics on the specified interface. If you specify only the
vsi-interface keyword, this command clears packet statistics on all VSI interfaces. If you do not
specify the vsi-interface [ vsi-interface-id ] option, this command clears packet
statistics on all interfaces. Make sure the specified VSI interfaces have been created on the device.
Usage guidelines
Use this command to clear history statistics before you collect traffic statistics for a time period.
Examples
# Clear packet statistics on VSI-interface 100.
<Sysname> reset counters interface vsi-interface 100
Related commands
display interface vsi-interface

shutdown

Use shutdown to shut down a VSI interface.
Use undo shutdown to bring up a VSI interface.
Syntax
shutdown
undo shutdown
Default
A VSI interface is not manually shut down.
Views
VSI interface view
Predefined user roles
network-admin
Examples
# Shut down VSI-interface 100.
<Sysname> system-view
[Sysname] interface vsi-interface 100
[Sysname-Vsi-interface100] shutdown

vtep group member local

Use vtep group member local to assign the local VTEP to a VTEP group.
Use undo vtep group member local to remove the local VTEP from a VTEP group.
Syntax
vtep group group-ip member local member-ip
undo vtep group group-ip member local
46