H3C CR16000-F Command Reference Manual page 13

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vsi vsi-name : Specifies a VSI name, a case-sensitive string of 1 to 31 characters.
interface-type interface-number : Specifies an interface by its type and number.
verbose : Displays detailed information about Layer 3 interfaces. If you do not specify this keyword,
the command displays brief information about Layer 3 interfaces.
Usage guidelines
If you do not specify any parameters, this command displays brief L2VPN information for all Layer 3
interfaces that are mapped to VSIs.
Examples
# Display brief L2VPN information for all Layer 3 interfaces that are mapped to VSIs.
<Sysname> display l2vpn interface
Total number of interfaces: 2, 1 up, 1 down
Interface
GE3/1/1
GE3/1/2
Table 3 Command output
Field
Interface
Owner
Link ID
State
Type
# Display detailed L2VPN information for all Layer 3 interfaces that are mapped to VSIs.
<Sysname> display l2vpn interface verbose
Interface: RAGG1
Owner
Link ID
State
Type
DF State
Statistics
Input Statistics:
Octets
Packets : 0
Owner
vxlan3
vxlan4
Description
Layer 3 interface name.
VSI name.
The interface's link ID on the VSI.
Physical state of the interface:
•
Up—The interface is physically up.
•
Down—The interface is physically down.
L2VPN type of the interface. This field displays VSI for the VXLAN feature.
: a
: 0
: Down
: VSI
: DF
: Enabled
: 0
Link ID
1
2
6
State Type
Up VSI
Down VSI