Reset L2Vpn Statistics Tunnel - H3C CR16000-F Command Reference Manual

Syntax
reset l2vpn statistics ac [ interface interface-type interface-number
[ service-instance instance-id ] ]
Views
User view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number : Specifies an interface by its type and
number.
service-instance instance-id : Specifies an Ethernet service instance ID in the range of 1
to 4096. You must specify this option if the interface interface-type interface-number
option specifies a Layer 2 interface. You cannot specify this option if the interface
interface-type interface-number option specifies a Layer 3 interface.
Usage guidelines
If you do not specify any parameters, this command clears packet statistics on all ACs.
Examples
# Clear packet statistics for Layer 3 interface GigabitEthernet 3/1/1.
<Sysname> reset l2vpn statistics ac interface gigabitethernet 3/1/1
Related commands
ac statistics enable
display l2vpn interface
display l2vpn service-instance verbose
statistics enable (Ethernet service instance view)

reset l2vpn statistics tunnel

Use reset l2vpn statistics tunnel to clear packet statistics on VXLAN tunnel interfaces.
Syntax
reset l2vpn statistics tunnel [ vsi vsi-name ]
Views
User view
Predefined user roles
network-admin
Parameters
vsi vsi-name : Specifies a VSI by its name, a case-sensitive string of 1 to 31 characters. If you do
not specify a VSI, this command clears packet statistics on VXLAN tunnel interfaces of all VSIs.
Examples
# Clear packet statistics on VXLAN tunnel interfaces of all VSIs.
<Sysname> reset l2vpn statistics tunnel
22