H3C CR16000-F Installation, Quick Start

H3C CR16000-F Routers Installation Quick Start-6PW106 H3C CR16000-F Routers Installation Quick Start-6PW106
This document provides a brief guide for installing H3C CR16000-F routers. For more installation This document provides a brief guide for installing H3C CR16000-F routers. For more installation
information, see H3C CR16000-F Routers Installation Guide. information, see H3C CR16000-F Routers Installation Guide.
The figures in this document are for illustration only. The figures in this document are for illustration only.
The installation procedure is similar for the CR16000-F routers. The following procedures use a The installation procedure is similar for the CR16000-F routers. The following procedures use a
CR16010-F router unless otherwise specified. CR16010-F router unless otherwise specified.
Paper manuals cannot be updated in real time with product changes.For most recent product Paper manuals cannot be updated in real time with product changes.For most recent product
information,see the E-manuals at the official website. information,see the E-manuals at the official website.

Safety recommendations

Safety recommendations
To avoid equipment damage or bodily injury, read the following safety recommendations before installation. To avoid equipment damage or bodily injury, read the following safety recommendations before installation.
Note that the recommendations do not cover every possible hazardous condition. Note that the recommendations do not cover every possible hazardous condition.
To prevent ESD damage, always wear an ESD wrist strap when working with the router, cards, or PCBs. To prevent ESD damage, always wear an ESD wrist strap when working with the router, cards, or PCBs.
Make sure the trap is reliably grounded. Make sure the trap is reliably grounded.
Do not install the router, FRUs, or cables with the power on. Do not install the router, FRUs, or cables with the power on.
To avoid equipment damage or bodily injury, make sure the router is reliably grounded before powering on To avoid equipment damage or bodily injury, make sure the router is reliably grounded before powering on
the router. the router.
To ensure good ventilation, install a filler panel in an unused slot. To ensure good ventilation, install a filler panel in an unused slot.

Tool list

Tool list
Prepare the following installation tools yourself as required. Prepare the following installation tools yourself as required.
Flat-blade Flat-blade Phillips Phillips Needle-nose Needle-nose
screwdriver screwdriver screwdriver screwdriver pliers pliers
Marker Marker Wire-stripping Wire-stripping
pliers pliers
Diagonal Diagonal Claw hammer Claw hammer
pliers pliers
BOM: 3104A0FV BOM: 3104A0FV
Claw hammer Claw hammer
This section only lists the most commonly used installation accessories. This section only lists the most commonly used installation accessories.
Grounding cable Grounding cable ESD wrist strap ESD wrist strap M6 screw M6 screw

Installing the router

Installing the router

Attaching cage nuts to the rack

Attaching cage nuts to the rack
Use a pattern tool to record the installation holes of the mounting brackets and mark the cage nut holes Use a pattern tool to record the installation holes of the mounting brackets and mark the cage nut holes
in the rack posts accordingly. in the rack posts accordingly.
Install cage nuts on the marked square holes. Install cage nuts on the marked square holes.
Removable cable tie Removable cable tie Cage nut Cage nut