H3C CR16000-F Command Reference Manual page 15

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number : Specifies an interface by its interface
type and number.
service-instance instance-id : Specifies an Ethernet service instance by its ID in the range
of 1 to 4096. Do not specify this option if a Layer 3 interface is specified. If you specify a Layer 2
Ethernet interface or Layer 2 aggregate interface, you must specify this option.
vsi vsi-name : Specifies a VSI name, a case-sensitive string of 1 to 31 characters.
ac : Specifies all ACs in the specified VSI. If you do not specify this keyword, the command displays
MAC address entries for all ACs and VXLAN tunnels in the specified VSI.
dynamic : Specifies dynamic MAC address entries learned in the data plane. If you do not specify
this keyword, the command displays all MAC address entries, including:
•
Dynamic remote- and local-MAC entries.
•
Remote-MAC entries advertised through BGP EVPN.
•
Manually added static remote-MAC entries.
•
Remote-MAC entries issued through OpenFlow.
VXLAN does not support static local-MAC entries.
count : Displays the number of MAC address entries. If you do not specify this keyword, the
command displays detailed information about MAC address entries.
Usage guidelines
This command displays all L2VPN MAC address entries if you do not specify any of the following
parameters:
•
interface interface-type interface-number .
•
service-instance instance-id .
•
vsi vsi-name .
Examples
# Display all L2VPN MAC address entries.
<Sysname> display l2vpn mac-address
MAC Address
0000-0000-000c
...
# Display the total number of L2VPN MAC address entries.
<Sysname> display l2vpn mac-address count
4 mac address(es) found
Table 5 Command output
Field
State
State VSI Name
Dynamic vpn1
Description
Entry state:
•
Dynamic—Local- or remote-MAC entry dynamically learned in the data plane.
8
Link ID/Name Aging
Tunnel60 Aging