Interface Vsi-Interface - H3C CR16000-F Command Reference Manual

Parameters
vsi-interface-id : Specifies a VSI interface by its number. The value range for this argument is
1 to 16383.
Usage guidelines
A VSI can have only one gateway interface. Multiple VSIs can share a gateway interface.
For multiple VSIs to share a VSI interface, you must assign IP addresses of different subnets to the
VSI interface and specify a subnet for each VSI. If the IP addresses of a VSI interface belong to the
same subnet, the VSI interface can be assigned only to one VSI.
Examples
# Specify VSI-interface 100 as the gateway interface for VSI vpna.
<Sysname> system-view
[Sysname] vsi vpna
[Sysname-vsi-vpna] gateway vsi-interface 100
Related commands

interface vsi-interface

interface vsi-interface
Use interface vsi-interface to create a VSI interface and enter its view, or enter the view of
an existing VSI interface.
Use undo interface vsi-interface to delete a VSI interface.
Syntax
interface vsi-interface vsi-interface-id
undo interface vsi-interface vsi-interface-id
Default
No VSI interfaces exist.
Views
System view
Predefined user roles
network-admin
Parameters
vsi-interface-id : Specifies a VSI interface number. The value range for this argument is 1 to
16383.
Examples
# Create VSI-interface 100 and enter VSI interface view.
<Sysname> system-view
[Sysname] interface vsi-interface 100
[Sysname-Vsi-interface100]
Related commands
gateway vsi-interface
43