H3C CR16000-F Command Reference Manual page 17

Table 6 Command output
Field
Total number of ACs
Interface
SrvID
Owner
LinkID
State
Type
# Display detailed information about all Ethernet service instances on GigabitEthernet 3/1/1.
<Sysname> display l2vpn service-instance interface gigabitethernet 3/1/1 verbose
Interface: BAGG1
Service Instance: 1
Encapsulation : s-vid 2
VSI Name : a
Link ID : 1
State : Down
DF state : BDF
Statistics : Enabled
Input Statistics:
Octets : 0
Packets : 0
Errors : 0
Discards: 0
Output Statistics:
Octets : 0
Packets : 0
Errors : 0
Discards: 0
Table 7 Command output
Field
Interface
Service Instance
Encapsulation
Link ID
State
Description
Total number of attachment circuits (ACs) and the number of ACs in each state
(up or down).
Name of a Layer 2 Ethernet interface or Layer 2 aggregate interface.
Ethernet service instance ID.
VSI name. This field is empty if an Ethernet service instance is not mapped to
any VSI.
Ethernet service instance's link ID on the VSI.
Ethernet service instance state:
•
Up.
•
Down.
L2VPN type of the Ethernet service instance:
•
VSI.
•
VPWS.
Description
Name of a Layer 2 Ethernet interface or Layer 2 aggregate interface.
Ethernet service instance ID.
Frame match criterion of the Ethernet service instance. If the Ethernet service
instance does not contain a match criterion, the command does not display this field.
Ethernet service instance's link ID on the VSI.
Ethernet service instance state:
•
Up.
10