Method For Setting As-Built Control Options; Method For Adding And Setting As-Built Surface Display - Komatsu D61EXi-24 Operation & Maintenance Manual

HANDLE CONTROL BOX
7.
On "GPS Comms Configuration" screen, set "Connection:"
to "UDP/IP", and press "Defaults".
8.
When the value in the figure is reached, press "Next".
9.
On "GPS Precisions" screen, input "Max. GPS errors (rov-
ing):" and "Max. GPS errors (point measurement):", and
press "Next".
10. On "GPS radio configuration" screen, select the radio infor-
mation, and press "Finish".
For detail, see "METHOD FOR CONFIGURING RADIOS
(3-20)".

METHOD FOR SETTING AS-BUILT CONTROL OPTIONS

METHOD FOR ADDING AND SETTING AS-BUILT SURFACE DISPLAY

This function enables you to control the as-built surface of "Elevation" and "Pass Counts" displayed by the cur-
rent surface with the internal memory of the server or the control box.
CONTROL MENU
AJD02617
AJD02618
AJD02619
4-33