HANDLE CONTROL BOX
SHORTCUT ON THE MAIN WINDOW
"Toggle As-built mode"
"Start/Stop As-built updates"
"Dozing mode selection"
"Blade load selection"
"Take a topo shot"
TOGGLE AS-BUILT MODE
You can change the as-built mode view to "Cut Fill", "Pass Counts", or "<none>" by pressing "Toggle As-built
mode" on the main window.
(Screen of "As-Built: Cut Fill" or "As-Built: Pass Counts")
(Screen of "As-Built: <none>")
START/STOP AS-BUILT UPDATES
You can start or stop updating the as-built surface by pressing "Start/Stop As-built updates" on the main window.
MAIN WINDOW DISPLAY
4-71