Komatsu D61EXi-24 Operation & Maintenance Manual page 101

HANDLE CONTROL BOX
4.
On "Surface Name and Type" screen, press the input sec-
tion for "Name".
5.
Input the name of Surface files to make newly, by using the
alphanumeric keyboard.
6.
Select "Flat Plane Surface" ("Surface type"), and press
"Next".
7.
On "Flat Plane Surface" screen, input the coordinate val-
ues ( m) of the "Point on surface" to refer to, or move the
machine to the base point, lower the blade edge to the
ground, and press "Take a topo shot".
FILE MENU
AJD02590
AJD02546
AJD02592
AJD02593
4-21