Komatsu D61EXi-24 Operation & Maintenance Manual page 103

HANDLE CONTROL BOX
4.
On "Surface Name and Type" screen, press the input sec-
tion for "Name".
5.
Input the name of Surface files to make newly, by using the
alphanumeric keyboard.
6.
Select "Sloping plane surface" ("Surface type"), and press
"Next".
7.
Check that "Sloping Plane Surface" screen is displayed.
8.
Move the machine to point "A" or "B", and then lower the
blade edge to the base point.
9.
Press "Take a topo shot" of point "A" or "B", and measure
the point.
10. On "Sloping Plane Surface" screen, press the input section
for "Grid interval" and "Crossfall Grade".
11. Input a value by using the numeric keyboard.
12. Press "Finish".
The screen returns to "Project Surfaces" screen.
FILE MENU
AJD02595
AJD02596
AJD02593
AJD02598
4-23