Supervisor Mode - Komatsu D61EXi-24 Operation & Maintenance Manual

TOOLS MENU
3.
On "Topo Survey" screen, select "Not active" for "Auto-
Topo:".
4.
Select "Topo shot (no prompt)" of "Topo button:".
5.
Press "Ok".
6.
On the main window, press "Take a topo shot".
"Auto-Topo:" (information set on detailed position screen)
and topographic survey recording are displayed.
For the information set on "Position Details" screen, see
"WHEN SELECTING PROMPT FOR DETAILS (4-49)".
(Example) Mark ○ at left end of blade on main window

SUPERVISOR MODE

In the supervisor mode of 3DMC, the supervisor can enable or disable the user to operate the menus, buttons,
and screen items.
A password is required to use the supervisor mode.
The password differs, depending on the case.
Default password: topcon
4-52
HANDLE CONTROL BOX
AJD02739
AJD02740