Method For Creating Crown Road Surface Files - Komatsu D61EXi-24 Operation & Maintenance Manual

FILE MENU
REMARK
You can make the sloping plane surface file by the following
methods, instead of measuring points "A" and "B" on "Sloping
Plane Surface" screen.
• Method 1
Set the point saved in the internal memory of the control
box as points "A" and "B" by "Set points".
• Method 2
Input the "Point on Surface" and "Main-fall (A -> B)" direct-
ly.
(You can set the flat base point by "Take a topo shot" or
"Set points" as well.)

METHOD FOR CREATING CROWN ROAD SURFACE FILES

When creating a crown road surface file, perform the following procedure.
1.
On the main window, press "iB logo key" and display the
main menu.
2.
On "File" menu, press "Surfaces..." and select.
3.
On "Project Surfaces" screen, press "New...".
4-24
HANDLE CONTROL BOX
AJD02599
AJD02582
AJD02589