Komatsu D61EXi-24 Operation & Maintenance Manual page 42

MACHINE OPERATIONS AND CONTROLS
SELECT ACTIVE FILE
Before starting the automatic control of blade, select the design surface to use.
For the method of selecting the design surface, see "ACTIVE FILE (4-30)".
HANDLE AUTOMATIC BLADE CONTROL
METHOD FOR ACTIVATING AUTOMATIC BLADE CONTROL
1.
Press Auto/Manual switch to turn off the blade automatic
control.
When the blade automatic control is turned on, "AUTO" is
displayed on the control box screen.
2.
Set the joystick (steering, directional and gear shift lever)
to FORWARD position (F).
3.
Perform LOWER trigger operation.
Perform this when the blade edge is higher than the de-
sign surface and height of the ground where the track con-
tacts. In this case, the blade automatic control starts only
after LOWER trigger operation.
3-28
OPERATION