OPERATION
TRANSPORTATION
Transporting the Machine
Contact your Komatsu distributor when transporting the machine.
The overall height and machine weight, the GNSS antenna bracket and the cylinder stroke sensor on the work
equipment cylinders are different from the non-ICT machine. For the overall weight of the machine, see "SPECI-
FICATIONS (5-2)".
NOTICE
Do not allow the cylinder to rotate when work equipment is not attached. If removing the GNSS antenna
bracket to shorten overall height, remove radio device antenna first.
REMOVE RADIO DEVICE ANTENNA CABLE
When transporting the machine, remove radio antenna (1).
When radio antenna is not removed
When radio antenna is removed
Overall height
( mm )
3535
3340
TRANSPORTATION
3-59