Komatsu D61EXi-24 Operation & Maintenance Manual page 105

HANDLE CONTROL BOX
4.
On "Surface Name and Type" screen, press the input sec-
tion for "Name".
5.
Input the name of Surface files to make newly, by using the
alphanumeric keyboard.
6.
Select "Crown road surface" ("Surface type"), and press
"Next".
7.
Check that "Crown Surface" screen is displayed.
8.
Move the machine to point "A" or "B", and then lower the
blade edge to the base point.
9.
Press "Take a topo shot" of point "A" or "B", and measure
the point.
10. Press the input section for "Width of road" and "Grade" of
"Cross-fall from crown".
11. Input a value by using the numeric keyboard.
12. Press "Finish".
The screen returns to "Project Surfaces" screen.
FILE MENU
AJD02601
AJD02602
AJD02593
AJD02603
4-25