HANDLE CONTROL BOX
The topographic survey recording is displayed.
(Example) Mark △ at left end of blade on main window
•
On the main window, each time "Take a topo shot" is
pressed, the coordinates of the blade edge are measured
and recorded.
Input the information of the point of "Position Details" every
time.
•
You can check the contents of "Point description:" by "De-
scription" on "Points" screen.
To display "Points" screen, press "File" and "Points" in or-
der in the main menu on the main window.
•
Use only numerals for "Name" of point. Set the information
of the point by the comment in "Description".
•
On the main window, each time "Take a topo shot" is
pressed, "Position Details" screen is displayed.
You can change the setting of "Point description:" every
time.
WHEN SELECTING NO PROMPT
1.
On the main window, press "iB logo key" and display the
main menu.
2.
On "Tools" menu, press "Topo survey..." and select.
TOOLS MENU
AJD02737
AJD02644
4-51