Komatsu D61EXi-24 Operation & Maintenance Manual page 144

VIEW MENU
METHOD FOR SETTING AS-BUILT SURFACE DISPLAY
When changing the setting of as-built surface display, perform the following procedure.
1.
On the main window, press "iB logo key" and display the
main menu.
2.
On "View" menu, press "Display options" and "As-built sur-
face..." in order, and select.
3.
Select or input necessary options on "As-built Surface"
screen, and press "Ok".
4.
Press any "Interval" button, and change the color.
REMARK
You can use 13 colors in total for cut/fill operation and
number of operation (number of passes).
5.
Press "Ok".
METHOD FOR SETTING POINT DISPLAY
When changing the display setting of the points, perform the following procedure.
1.
On the main window, press "iB logo key" and display the main menu.
2.
On "View" menu, press "Display options" and "Points..." in
order, and select.
You can set the display of the points and base point.
(Example) You can display the symbol or number of a
point during topo survey.
4-64
HANDLE CONTROL BOX
AJD02671
AJD02672
AJD02673