Komatsu D61EXi-24 Operation & Maintenance Manual page 99

HANDLE CONTROL BOX
REMARK
If you cannot set a surface contained in the project file as the current work, perform the following proce-
dure.
(Example) When setting flat surface "larry" as current work
6.
On the main window, press "iB logo key" and display the
main menu.
7.
On "File" menu, press "Surfaces..." and select.
8.
On "Project Surfaces" screen, select a surface to be set as
the current work.
9.
Press "Show".
FILE MENU
AJD02582
AJD02585
AJD02586
4-19