Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
When the blade automatic control is switched from on to off,
pop-up message "Auto Control Disengaged!" is displayed on
the control box screen.
When the blade automatic control is automatically turned off
In the following conditions, even if Auto/Manual switch is not
pressed, the blade automatic control is automatically turned off.
•
When the machine is stopped for 30 seconds or more
•
When the blade edge protrudes out of the designed range.
•
The number of GNSS satellites which can receive the ra-
dio waves is decreased.
•
When the radio waves from the base station cannot be re-
ceived.
•
When the starting switch of the machine is turned to OFF
position.
•
If there is an abnormality in the system such as open circuit, etc.
3-8
OPERATION
Hide quick links:
Advertisement
Chapters
Table of Contents
