Komatsu D61EXi-24 Operation & Maintenance Manual page 120

CONTROL MENU
3.
When setting the blade control point to any point of the
blade edge, press any point (in the range of (C)) of the
blade edge at the top of the screen.
4.
Press "Move control".
WHEN YOU CHANGE BLADE CONTROL POINT ON BLADE CONTROL SCREEN
When "Control using single point on blade" is selected, you can change the blade control point by using the slid-
er button or the right/left arrow on "Blade Control" screen.
1.
On "Blade Control" screen, check "Control using single
point on blade".
2.
Select 1 point apart from the right/left of the blade by mov-
ing the slider button to the right/left or by using the right/left
arrow.
3.
Press "Ok".
This blade control point is applied to the machine.
4-40
HANDLE CONTROL BOX
AJD02705
AJD02632