Komatsu D61EXi-24 Operation & Maintenance Manual page 119

HANDLE CONTROL BOX
3.
On "Blade Control" screen, check "Control using single
point on blade".
4.
Press "Ok".
WHEN YOU CHANGE BLADE CONTROL POINT QUICKLY
You can change the blade control point quickly while the profile is displayed on the main window.
1.
When setting the blade control point to the left end (or right
end) of the blade edge, press left end (A) (or right end (B))
of the blade edge at the top of the screen.
2.
Press "Move control left" (or "Move control right").
CONTROL MENU
AJD02632
AJD02704
4-39