Table of Contents
Advertisement
TROUBLES AND ACTIONS
ACTIONS WHEN POP-UP MESSAGE IS DISPLAYED ON CONTROL BOX
Control box screen display
Pop-up message (screen center)
Auto Control Disengaged!
Cylinder Sensor Reset Request! Please move
the Lift cylinder to stroke end and keep it
there for 2 seconds.
Cylinder Sensor Reset Request! Please move
the Tilt cylinder to stroke end and keep it
there for 2 seconds.
Cylinder Sensor Reset Request! Please move
the Angle cylinder to stroke end and keep it
there for 2 seconds.
3-66
Main causes
Automatic control of blade
(Red)
is turned off from on.
Resetting of the stroke end
(Gray)
of lift cylinder is not com-
pleted.
Resetting of the stroke end
(Gray)
of tilt cylinder is not com-
pleted.
Resetting of the stroke end
(Gray)
of angle cylinder is not
completed.
OPERATION
Remedy
Press the Auto/Manual switch.
For details, see "AUTO/
MANUAL SWITCH (3-6)".
Perform resetting of the stroke
end of cylinder. For details,
see " RESET CYLINDER
STROKE END (3-16)".
Hide quick links:
Advertisement
Chapters
Table of Contents
