Komatsu D61EXi-24 Operation & Maintenance Manual page 165

HANDLE CONTROL BOX
1.
On the main window, hold down the triangular mesh of TIN
data to be selected, and display the menu.
2.
Select "Isolate surface...".
3.
On "Isolate Surface Region" screen, separate the triangu-
lar mesh from the active TIN data.
• "Maximum grade transition :"
You can change the size of triangular mesh (isolate
surface) to be removed from the active TIN data.
• "Extend grade at edge by :"
You can extend the triangular mesh separated as the
isolate surface.
• "Surface color :"
You can set the display color of the isolate surface.
• "Extension color :"
You can set the display color of the extended isolate
surface.
4.
Press "Ok".
The screen returns to the main window.
5.
After finishing work, hold down the main window, and dis-
play the menu.
6.
Select "Stop isolating".
OPERATION ON MAIN MENU
AJD02707
AJD02708
AJD02710
4-85