OPERATION
MACHINE OPERATIONS AND CONTROLS
(T) Design surface
PUSH AND TURN OPERATION
Push and turn work is such operation that the machine pushes piled soil forward and spread it while changing
the direction by turning.
Select "Cutting & Carry".
The method of the automatic control of blade is the same as of spreading operation.
For the spreading operation, see "SPREADING OPERATION (3-48)".
Turn the machine to the direction of spreading.
REMARK
If you face the blade straight forward by angling operation, less soil spills from the sides of the blade.
Angling operation is not an automatic operation. Operate the angle switch to angle the blade.
3-51