Table of Contents
Advertisement
•
Rising and falling event index values are 15, which will trigger the previously
configured Event.
ia#(config) rmon alarm index 20 variable 1.3.6.1.2.1.31.1.5.0 interval
300 startup both type absolute-value rising-threshold 1 falling-
threshold 1 rising-event-index 15 falling-event-index 15 owner "help
desk"
Displaying RMON Information
The CLI rmon show commands allow you to display the same RMON statistics that can
be viewed from a management station. To display RMON statistics for the IA, use the
following CLI command lines in Enable mode:
To show Ethernet statistics.
To show all events and logs.
To show all alarms.
To show histories and logs.
To show hosts and logs.
To show all Host Top N and
logs.
To show matrices and logs.
To show all channels.
To show all filters.
To show all packet captures
and logs.
To display the RMON 2
Protocol Directory.
To display the RMON 2
Protocol Distribution.
To display the RMON 2
Address Map table.
To show Network Layer Host
logs.
To show Application Layer
Host logs.
Internet Appliance User Reference Manual
Chapter 17: RMON Configuration Guide
rmon show etherstats <port-list>|all-ports
rmon show events
rmon show alarms
rmon show history <port-list>|all-ports
rmon show hosts <port-list>|all-ports [summary]
rmon show host-top-n
rmon show matrix <port-list>|all-ports
rmon show channels
rmon show filters
rmon show packet-capture
rmon show protocol-directory
rmon show protocol-distribution <port-list>|all-
ports
rmon show address-map <port-list>|all-ports
rmon show nl-host<port-list>|all-ports [summary]
rmon show al-host<port-list>|all-ports [summary]
257
Advertisement
Table of Contents
