Overview - Omron CS1W-CLK12-V1 Operation Manual

CVM1 and CV-series Optical Ring Controller Link Units
4-2-1

Overview

Note
70
H-PCF cable GI cable
Unit Number
00 to 15 (default is 00)
Node Address
01 to 62 (default is 01) (see note)
1. CX-Net in CX-Programmer can be used in systems with up to32 nodes
(node addresses 1 to 32). Use Controller Link Support Software (Ver. 2.00
or later) for systems with up to 62 nodes (node addresses 1 to 62).
2. With the token-bus method, the maximum number of nodes in an Optical
Bus System (i.e., model numbers ending in CLK11) with nodes is 32 (node
addresses 1 to 32).
Unit Number setting
Node Address setting
Setting range
All nodes in the Network
Setting range
All nodes in the Network
Section 4-2
Nodes
Nodes