Omron CS1W-CLK12-V1 Operation Manual page 40

Specifications and Configurations
Controller Link Support Software (Ver. 2.00)
Controlling the Network with a Programming Device on a Computer
IBM PC/AT or
compatible
Setting data link tables
The Controller Link Support Software can be used to manually set data links,
to set Controller Link parameters, and to monitor the Controller Link Network.
The Controller Link Support Software is run on a personal computer con-
nected to a C200HX/HG/HE, CVM1, or CV-series PLC or a personal com-
puter in which a Controller Link Support Board has been mounted. (The
Controller Link Support Software cannot be used on a computer connected
directly to a CS-series PLC.) The following operations are possible.
• Setting the data link mode to "manual" (creating and storing data link
tables).
• Starting/stopping data links.
• Reading (monitoring) network status.
• Reading error logs.
• Setting routing tables.
• Testing the network.
• Changing network parameters.
• Reading the network connection configuration data and status (in token-
ring mode only).
+
Controller Link
Support Software
Transmission
Note The Controller Link Support Software (Ver. 2.00 or later) can be used as a
part of the SYSMAC Support Software.
CS-series PLCs
Controller
Link Unit
Nodes
CPU Unit
Section 1-2
CVM1 and CV-series PLCs
Controller
Link Unit
Nodes
CPU Unit
23