Omron CS1W-CLK12-V1 Operation Manual page 292

Optical Fiber Cables with Connectors
Name
50/125 µm AGF Cable
Optical two-core cable with connectors on both ends
62.5/125 µm AGF Cable
Optical two-core cable with connectors on both ends
The value "l" in the model number indicates the stripped cord length, i.e., the distance from the end of the
sheathing to the tip of the Optical Connector. The standard value for "l" is 0.2 m.
The value "L" in the model number indicates the total length of the cable (m) from the tip of one Optical Connec-
tor to the tip of the other Optical Connector.
When a pulling eye must be attached, specify the model and size as shown in the following table.
Name
Pulling eye attached TG05-MM-/lL-P NM2-C-V
on one end
Pulling eyes attached TG06-MM-/lL-PP NM2-C-V
on both ends
Note When a pulling eye is attached on just one end, it will be attached to the end of the cable roll.
Model
TG05-MM-/lL
NM2-C-V
TG06-MM-/lL
NM2-C-V
Model
2×CSV-EG-5/30
2×CSV-EG-6/35
Size
2×CSV-EG-5/30 Sumitomo Electric Indus-
tries
2×CSV-EG-6/35
Size
Sumitomo Electric Industries
Appendix B
Manufacturer
Manufacturer
275